Go from Commuter to Camper in less than 10 seconds with this set of quick release RacksBrax HD Hitches which have been especially adapted to fit the SUPA PEG range of 4WD awnings.
This also suits all pull-out awnings, ensuite tents and conduit tubes.
Fits Supa-Peg and other brand awnings with 33mm up to 45mm Bolt Centers
- On or Off in less than 10 seconds - Secure an lockable - Easy to install - Engineered to work in all conditions - Rattle free - 5 Years warranty by manufacturer(conditions apply) - Fit all Supa-Peg Awnings and most roof-rack mounted awnings and conduit tube brackets - Reduces wind drag and improve fuel consumption - Prop Cleats include so you can make your awning freestanding - Simple storage using the Racks Brax HD Wall-Mount kit - Stainless steel fastners included - Designer by experienced engineers with a passion for adventure
MODELS:
Standard 2 x Hinches with fittings 2 x Prop Cleats to pitch an awning freestanding
Tradesman II 2 x Hinches with fittings 2 x Prop Cleats to pitch an awning freestanding 2 x Holders for storage tube HD Hintch Wall-Mount kit for off-vehicle use/storage
Tradesman III 3 x Hinches with fittings 2 x Prop Cleats to pitch an awning freestanding 3 x Holders for storage tube HD Hintch Wall-Mount kit for off-vehicle use/storage
Wall Mount Pack
2 x Bodies: these bolt directly onto your garage wall so an awning, tradesman tube or ensuite tent can be loaded onto a wall for conduit when not in use. Wall fasteners are not included.
1. RacksBrax HD Hitch Standard Pack (8179)
The RacksBrax HD Hitch Standard Pack includes a set of glass reinforced nylon brackets with stainless steel fasteners to lock-on and take off roof rack accessories including pull-out awnings, ensuite tents and conduit tubes.
This pack contains:
2 x Bodies: these bolt directly onto a roof rack or roof rack mounted pull-out awning bracket
2 x Holders: these bolt directly onto the pull-out awning or conduit tube clamps
2 x Pins (with lanyard): this ties each Body and Holder together on the roof rack; all of which are locked together with an in-built barrel lock
The RacksBrax HD Hitch Standard Pack also includes 2 Prop Cleats which allow a pull-out awning to be pitched freestanding once it is erected off the side of a vehicle. See instructions for more detail.
The RacksBrax HD Hitch Standard Pack come with stainless steel fasteners to suit both M6 and M8 sized drill holes in either the accessory bracket or the roof rack; both bolt sizes are also provided to allow for awning spine tracks which suit M6 or M8 bolts.
SPECIFICATIONS
Pack size: 210mm x 125mm x 90mm Pack weight: 1.2kg
2. RacksBrax HD Hitch Tradesman II Pack (8180)
The RacksBrax HD Hitch Tradesman II Pack includes a set of glass reinforced nylon brackets with stainless steel fasteners to lock-on and take off roof rack accessories including pull-out awnings, ensuite tents and conduit tubes. This pack also includes a set of RacksBrax HD Wall Mounts so that the roof rack accessory can be fixed to a garage wall when not in use.
This pack contains:
2 x Bodies: these bolt directly onto a roof rack or roof rack mounted pull-out awning bracket
2 x Holders: these bolt directly onto the pull-out awning or conduit tube clamps
2 x Pins (with lanyard): this ties each Body and Holder together on the roof rack; all of which are locked together with an in-built barrel lock
Wall Mount Pack: 1 x pair of bracket bodies to fix to a garage wall to quickly swap from a pull-out awning to a conduit tube
The RacksBrax HD Hitch Tradesman II Pack also includes 2 Prop Cleats to enable a pull-out awning to be pitched freestanding once it is erected off the side of a vehicle. See instructions for more detail.
The RacksBrax HD Hitch Tradesman II Pack come with stainless steel fasteners to suit both M6 and M8 sized drill holes in either the accessory bracket or the roof rack; both bolt sizes are also provided to allow for awning spine tracks which suit M6 or M8 bolts.
SPECIFICATIONS
Pack size: 210mm x 125mm x 180mm Pack weight: 2.0kg
3. RacksBrax HD Hitch Tradesman III Pack (8181)
The RacksBrax HD Hitch Tradesman III Pack includes a set of three glass reinforced nylon brackets with stainless steel fasteners to lock-on and take off extra heavy roof rack accessories including pull-out awnings, ensuite tents and conduit tubes. This pack also includes a set of two RacksBrax HD Wall Mounts so that the roof rack accessory can be fixed to a garage wall when not in use.
This pack contains:
3 x Bodies: these bolt directly onto a roof rack or roof rack mounted pull-out awning bracket
3 x Holders: these bolt directly onto the pull-out awning or conduit tube clamps
3 x Pins (with lanyard): this ties each Body and Holder together on the roof rack; all of which are locked together with an in-built barrel lock
Wall Mount Pack: 2 bracket bodies to fix to a garage wall to quickly swap from a pull-out awning to a conduit tube
The RacksBrax HD Hitch Tradesman III Pack also includes 2 Prop Cleats to enable a pull-out awning to be pitched freestanding once it is erected off the side of a vehicle. See instructions for more detail.
The RacksBrax HD Hitch Tradesman III Pack comes with stainless steel fasteners to suit both M6 and M8 sized drill holes in either the awning bracket or the roof rack; both bolt sizes are also provided to allow for awning spine tracks which suit M6 or M8 bolts.
SPECIFICATIONS
Pack size: 210mm x 125mm x 180mm Pack weight: 2.5kg
4. RacksBrax HD Wall Mount Pack (8160)
Swap from Commuter to Camper, Tradesman to Tourer and back again with the RacksBrax HD Wall Mount Pack. This pack includes one pair of quick release bracket bodies so that your roof rack accessory can be fixed to a garage wall when not in use. This allows for easy changeover from awning to conduit tube and back to awning … each in less than 10 seconds.
The HD Wall Mount Pack includes:
2 x Bodies: these bolt directly onto your garage wall so an awning, tradesman tube or ensuite tent can be loaded onto a wall for conduit when not in use. Wall fasteners are not included.
SPECIFICATIONS
Pack size: 210mm x 120mm x 40mm Pack weight: 0.3kg
Australia's Largest 4WD Awning Manufacturer.
Supa-RV Australia has been actively involved in the 4WD Awning industry for close to 10 years. We are based halfway between Brisbane and the Gold Coast in Yatala Queensland and manufacture a wide range of 4WD awnings specifically targeted for our Australian conditions. This range includes side awnings, rear awnings, 180 degree awnings and wing awnings.
Supa-RV is a subsidiary of Supa-Peg Australia allowing us to utilize an extensive range of quality componentry for our awnings including poles, pegs and ropes. We offer an awesome range of quality 4WD awnings at a great price. So, if you are after an Australian Made awning for your 4WD, a 2-year Australian warranty and continual product support from the manufacture, then take a look at our range.
and other handy camping equipment & accessories for outdoors adventures. Great price awnings, camping equipment and supplies at the best quality you will find around. We have the best cost benefit in the rv camping industry. Durable and strong awnings with good price and local Australian Support.
Side Awnings, Rear Awnings, Rear Wing Awnings, 180 Degree Awnings and 270 Degree Awnings. We can also custom make for you where we can to suit your vehicle or trailer.
We also manufacture custom caravan annexes and can supply and install caravan awnings.
Supa-RV Australia also has a range of caravan de-flapper and anti-flap kits, curved awning rafters, white caravan poles, bed flys, and a range of caravan accessories.
' Competitively priced and built to a quality that out shines our competitors. Our awnings and annexes are durable and strong and come with local Australian support.
'
Have a browse through the full range on our website.
If you have any questions with regarding fitting your vehicle, camper trailer or caravan with a 4x4 awning or caravan with an annex, give our friendly team a call for our expert opinion.
CONTACTS
Address:14 Binary Street Yatala QLD 4207, Gold Coast AU