FREE SHIPPING ON ORDERS OVER $2,000 IN AUSTRALIA ONLY
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
Quick Release Awning Brackets (HD HITCH Racks Brax)
  • SKU: RacksBraxSTD

Quick Release Awning Brackets (HD HITCH Racks Brax)

AUD$166.90
DESCRIPTION

Go from Commuter to Camper in less than 10 seconds with this set of quick release RacksBrax HD Hitches which have been especially adapted to fit the SUPA PEG range of 4WD awnings.

This also suits all pull-out awnings, ensuite tents and conduit tubes.

Fits Supa-Peg and other brand awnings with 33mm up to 45mm Bolt Centers

- On or Off in less than 10 seconds
- Secure an lockable
- Easy to install
- Engineered to work in all conditions
- Rattle free
- 5 Years warranty by manufacturer(conditions apply)
- Fit all Supa-Peg Awnings and most roof-rack mounted awnings and conduit tube brackets
- Reduces wind drag and improve fuel consumption
- Prop Cleats include so you can make your awning freestanding
- Simple storage using the Racks Brax HD Wall-Mount kit
- Stainless steel fastners included
- Designer by experienced engineers with a passion for adventure

MODELS:

Standard
2 x Hinches with fittings
2 x Prop Cleats to pitch an awning freestanding

Tradesman II
2 x Hinches with fittings
2 x Prop Cleats to pitch an awning freestanding
2 x Holders for storage tube
HD Hintch Wall-Mount kit for off-vehicle use/storage

Tradesman III
3 x Hinches with fittings
2 x Prop Cleats to pitch an awning freestanding
3 x Holders for storage tube
HD Hintch Wall-Mount kit for off-vehicle use/storage

Wall Mount Pack

  • 2 x Bodies:  these bolt directly onto your garage wall so an awning, tradesman tube or ensuite tent can be loaded onto a wall for conduit when not in use. Wall fasteners are not included.


1. RacksBrax HD Hitch Standard Pack (8179)

The RacksBrax HD Hitch Standard Pack includes a set of glass reinforced nylon brackets with stainless steel fasteners to lock-on and take off roof rack accessories including pull-out awnings, ensuite tents and conduit tubes. 

This pack contains:   

  • 2 x Bodies:  these bolt directly onto a roof rack or roof rack mounted pull-out awning bracket
  • 2 x Holders:  these bolt directly onto the pull-out awning or conduit tube clamps
  • 2 x Pins (with lanyard):  this ties each Body and Holder together on the roof rack; all of which are locked together with an in-built barrel lock

The RacksBrax HD Hitch Standard Pack also includes 2 Prop Cleats which allow a pull-out awning to be pitched freestanding once it is erected off the side of a vehicle. See instructions for more detail.

The RacksBrax HD Hitch Standard Pack come with stainless steel fasteners to suit both M6 and M8 sized drill holes in either the accessory bracket or the roof rack; both bolt sizes are also provided to allow for awning spine tracks which suit M6 or M8 bolts.

SPECIFICATIONS

Pack size:             210mm x 125mm x 90mm
Pack weight:       1.2kg

2. RacksBrax HD Hitch Tradesman II Pack (8180)

The RacksBrax HD Hitch Tradesman II Pack includes a set of glass reinforced nylon brackets with stainless steel fasteners to lock-on and take off roof rack accessories including pull-out awnings, ensuite tents and conduit tubes.  This pack also includes a set of RacksBrax HD Wall Mounts so that the roof rack accessory can be fixed to a garage wall when not in use.

This pack contains:  

  • 2 x Bodies:  these bolt directly onto a roof rack or roof rack mounted pull-out awning bracket
  • 2 x Holders:  these bolt directly onto the pull-out awning or conduit tube clamps
  • 2 x Pins (with lanyard):  this ties each Body and Holder together on the roof rack; all of which are locked together with an in-built barrel lock
  • Wall Mount Pack: 1 x pair of bracket bodies to fix to a garage wall to quickly swap from a pull-out awning to a conduit tube

The RacksBrax HD Hitch Tradesman II Pack also includes 2 Prop Cleats to enable a pull-out awning to be pitched freestanding once it is erected off the side of a vehicle. See instructions for more detail.

The RacksBrax HD Hitch Tradesman II Pack come with stainless steel fasteners to suit both M6 and M8 sized drill holes in either the accessory bracket or the roof rack; both bolt sizes are also provided to allow for awning spine tracks which suit M6 or M8 bolts.

SPECIFICATIONS

Pack size:             210mm x 125mm x 180mm
Pack weight:       2.0kg

3. RacksBrax HD Hitch Tradesman III Pack (8181)

The RacksBrax HD Hitch Tradesman III Pack includes a set of three glass reinforced nylon brackets with stainless steel fasteners to lock-on and take off extra heavy roof rack accessories including pull-out awnings, ensuite tents and conduit tubes.  This pack also includes a set of two RacksBrax HD Wall Mounts so that the roof rack accessory can be fixed to a garage wall when not in use. 

This pack contains:  

  • 3 x Bodies:  these bolt directly onto a roof rack or roof rack mounted pull-out awning bracket
  • 3 x Holders:  these bolt directly onto the pull-out awning or conduit tube clamps
  • 3 x Pins (with lanyard):  this ties each Body and Holder together on the roof rack; all of which are locked together with an in-built barrel lock
  • Wall Mount Pack: 2 bracket bodies to fix to a garage wall to quickly swap from a pull-out awning to a conduit tube

The RacksBrax HD Hitch Tradesman III Pack also includes 2 Prop Cleats to enable a pull-out awning to be pitched freestanding once it is erected off the side of a vehicle. See instructions for more detail.

The RacksBrax HD Hitch Tradesman III Pack comes with stainless steel fasteners to suit both M6 and M8 sized drill holes in either the awning bracket or the roof rack; both bolt sizes are also provided to allow for awning spine tracks which suit M6 or M8 bolts.

SPECIFICATIONS

Pack size:             210mm x 125mm x 180mm
Pack weight:       2.5kg

4. RacksBrax HD Wall Mount Pack (8160)


Swap from Commuter to Camper, Tradesman to Tourer and back again with the RacksBrax HD Wall Mount Pack.  This pack includes one pair of quick release bracket bodies so that your roof rack accessory can be fixed to a garage wall when not in use.  This allows for easy changeover from awning to conduit tube and back to awning … each in less than 10 seconds.


The HD Wall Mount Pack includes:

 

  • 2 x Bodies:  these bolt directly onto your garage wall so an awning, tradesman tube or ensuite tent can be loaded onto a wall for conduit when not in use. Wall fasteners are not included.

SPECIFICATIONS

Pack size:             210mm x 120mm x 40mm
Pack weight:       0.3kg

 







BACK TO TOP